AIR SPRINGS OF PHOENIX

SINGLE CONVOLUTION RUBBER BELLOWS ONLY
Item code | Max. diameter (mm) | Max. stroke (mm) | Max. load (kN) | Recommended height |

SINGLE CONVOLUTION WITH METAL PARTS
Item code | Max. diameter (mm) | Max. stroke (mm) | Max. load (kN) | Standard air inlet |
SP 1 B 04 | 142 | 60 | 6.0 | G 1/4 |
SP 1 B 07 | 215 | 71 | 13.88 | G 1/4 |
SP 1 B 12-1 | 248 | 100 | 17.3 | G 3/4 |
SP 1 B 12-3 | 248 | 100 | 17.3 | G 3/4 |
SP 1 B 22 | 340 | 120 | 31.22 | G 3/4 |
SP 1 B 34 | 400 | 125 | 54.14 | G 3/4 |

SINGLE CONVOLUTION WITH BEAD RINGS
Item code | Max. diameter (mm) | Max. stroke (mm) | Max. load (kN) | Standard air inlet |
[table “00” not found /]

DOUBLE CONVOLUTION WITH RUBBER BELLOWS ONLY
Item code | Max. diameter (mm) | Max. stroke (mm) | Max. load (kN) | Recommended height |

DOUBLE CONVOLUTION WITH METAL PARTS
Item code | Max. diameter (mm) | Max. stroke (mm) | Max. load (kN) | Standard air inlet |
SP 2 B 04 R | 150 | 110 | 5.4 | G 1/4 |
SP 2 B 05 R | 151 | 90 | 7.2 | G 1/4 |
SP 2 B 05 Ra | 162 | 110 | 7.3 | G 1/4 |
SP 2 B 07 R | 210 | 160 | 10.8 | G 1/4 |
SP 2 B 12 R | 243 | 165 | 15.9 | G 1/4 |
SP 2 B 12 R1 | 243 | 165 | 15.9 | G 3/4 |
SP 2 B 22 R | 320 | 200 | 32.3 | G 3/4 |
SP 2 B 34 R | 370 | 170 | 46.5 | G 3/4 |

DOUBLE CONVOLUTION WITH BEAD RINGS
Item code | Max. diameter (mm) | Max. stroke (mm) | Max. load (kN) | Standard air inlet |
[table “00” not found /]

SLEEVE TYPE
Item code | Max. diameter (mm) | Max. stroke (mm) | Max. load (kN) | Standard air inlet |
[table “00” not found /]

ALIVIO 2000
Phoenix Vibration Controls developed the ALIVIO 2000. The Alivio 2000 is special air cushioned Phoenix machine mount. It’s superior advantages are applicable in a wide variety of different applications. The displacement under static load can be adjusted to an optimal operating point by regulation of the air pressure. The low vertical stiffness is nearly constant over a wide range of pressure. Critical resonance speed approximately 150 rpm. High vibration isolation degree from idle till maximum engine speed.
Mould No. | Item number | Hardness | Length | Width | Height | Thread | Max. load Fz(N) | Serie |
Alivio 2000 | Alivio 2000 | 175 | 175 | 100 | M20 | 5000 | Phoenix® Alivio 2000 |

HIGH TEMPERATURE EPDM
Item code | Max. diameter (mm) | Max. stroke (mm) | Max. load (kN) | Standard air inlet |
[table “00” not found /]